Daylight effect through translucent flooring

clear-PEP® UV PC stage in the project “Earl of Devon London”

The premises of a disused pub in London have been cleverly transformed into brightly lit living and working spaces.

The original ceiling height of 3.3 metres has been utilised allowing the penetration of a large amount of daylight. By removing some of the walls and replacing the dull colours, the potential of the property came to the fore. Everything in this project is kept in white – it’s about different reflections and textures to improve the new design and gain daylight qualitites.

The final phase of the refurbishment was to convert the existing basement rooms to use as a laboratory or office. For this purpose a cavity has been created along the length of the exterior glazing on the ground floor so that natural light illuminates the floor. This was further enhanced by the use of translucent clear-PEP® UV PC stage panels.

The panels have a scratch-resistant, non-slip surface and can carry a weight of 500 kg / m2. The translucent panels are available in standard size 2000 x 1000 x 40 mm. The low weight allows the use of cost-efficient designs and the use of LED lighting can result in a unique ambience.

Please click here for the data sheet.

We produce sustainably.

Sustainability & ESG – Innovation for a Future-Ready Economy

Sustainability & ESG

The location of our company inspires the entire team every day to actively contribute to reducing environmental pollution. Surrounded by unspoiled mountains and meadows, design composite relied on state-of-the-art ecological construction methods when building its new production facility in the Salzburg region of Pinzgau.
The measures implemented have resulted in a positive energy balance and enabled the sustainable reduction of a calculated CO₂ emission equivalent of 140 tons per year.

For us, sustainability is more than a goal – it is an integral part of our corporate strategy.
Through innovative technologies, a responsible supply chain, and a clear ESG focus, we develop sustainable solutions that meet the requirements of tomorrow.

Sustainability at the Niedernsill Site
  • 95% renewable energy (Scope 1 and 2 in accordance with GHG Protocol guidelines) for climate-friendly production

  • Attractive working conditions for dedicated employees

  • Active support of regional initiatives

Innovation & Sustainable Supply Chain
  • Development of smart solutions in close collaboration with customers and suppliers

  • Circular-ready products

  • Continuous advancement of sustainable product innovations

94% RENEWABLE ENERGY IN SCOPE 1 & 2 (LT GHG) NO FOSSIL FUELS SLIP-RESISTANT READY TO INSTALL ELECTRIC VEHICLE FLEET WORKING WITH FRIENDS SUSTAINABLE LARGE-FORMAT INSULATING INDIVIDUAL 100% RENEWABLE ELECTRICITY ULTRA-LIGHT STIFF HIGH-STRENGTH 202 KWP PHOTOVOLTAIC SYSTEM PRODUCTION HEAT RECOVERY FOR HEATING PASSIVE HOUSE BUILDING STANDARD
94% RENEWABLE ENERGY IN SCOPE 1 & 2 (LT GHG) ELECTRIC VEHICLE FLEET NO FOSSIL FUELS SLIP-RESISTANT 100% RENEWABLE ELECTRICITY WORKING WITH FRIENDS HIGH-STRENGTH LARGE-FORMAT SUSTAINABLE ULTRA-LIGHT 202 KWP PHOTOVOLTAIC SYSTEM STIFF INDIVIDUAL INSULATING READY TO INSTALL PASSIVE HOUSE BUILDING STANDARD PRODUCTION HEAT RECOVERY FOR HEATING

ESG brochure

Design Composite GmbH

Gewerbegebiet Lengdorf 4
5722 Niedernsill
Austria

+43 6548 203 970

info@design-composite.com

Design Composite GmbH

Gewerbegebiet Lengdorf 4
5722 Niedernsill
Austria

+43 6548 203 970